[盒子求助]
这个到底是CM201-2还是211-2?
[复制链接]现在用PL-2303芯片的TTL连接,putty跑马显示:
Bootrom start
Boot Media: eMMC (Default Speed)
Decrypt auxiliary code ...OK
lsadc voltage min: 000000FE, max: 00000100, aver: 000000FF, index: 00000004
Enter boot auxiliary code
Auxiliary code - v1.00
DDR code - V1.1.2.1 20171011
Build: Sep 11 2018 - 19:55:16
Invalid reg version
Boot auxiliary code execute failed.
STATE:0x00000000 0x00000000 0x00000000 0x00000000
putty还不能输入任何代码。
下载CM201-2 YS的备份固件包,用HiTool5.13烧写eMMC,出现:
Bootrom start
Boot Media: eMMC (Default Speed)
##############################################
Decrypt auxiliary code ...OK
lsadc voltage min: 000000FE, max: 00000101, aver: 000000FF, index: 00000004
Failed to send the boot data.
1. The system fails to run properly due to an error in boot code compilation.
2. If the secure boot function is disabled and boot rootkey is set for the OEM, the boot image is encrypted, but the boot rootkey used for encrypting the boot is different from the boot rootkey burnt to the OTP.
3. The chip OTP is set to forcibly decrypt the boot image. However, the boot is not correctly encrypted.
4. The board DDR is faulty.
5. The boot code does not support the type of the flash memory to be burnt. If the boot print function is enabled, you can view the printing information through the serial port, showing that the current flash memory type is not supported.
Timeout error.
Failed to send the head frame.
Enter boot auxiliary code
Auxiliary code - v1.00
DDR code - V1.1.2.1 20171011
Build: Sep 11 2018 - 19:55:16
Invalid reg version
Boot auxiliary code execute failed.
STATE:0x00000000 0x00000000 0x00000000 0x00000000
Failed to download fastboot!
难道彻底成砖了?谁有救砖包呢?
Bootrom start
Boot Media: eMMC (Default Speed)
Decrypt auxiliary code ...OK
lsadc voltage min: 000000FE, max: 00000100, aver: 000000FF, index: 00000004
Enter boot auxiliary code
Auxiliary code - v1.00
DDR code - V1.1.2.1 20171011
Build: Sep 11 2018 - 19:55:16
Invalid reg version
Boot auxiliary code execute failed.
STATE:0x00000000 0x00000000 0x00000000 0x00000000
putty还不能输入任何代码。
下载CM201-2 YS的备份固件包,用HiTool5.13烧写eMMC,出现:
Bootrom start
Boot Media: eMMC (Default Speed)
##############################################
Decrypt auxiliary code ...OK
lsadc voltage min: 000000FE, max: 00000101, aver: 000000FF, index: 00000004
Failed to send the boot data.
1. The system fails to run properly due to an error in boot code compilation.
2. If the secure boot function is disabled and boot rootkey is set for the OEM, the boot image is encrypted, but the boot rootkey used for encrypting the boot is different from the boot rootkey burnt to the OTP.
3. The chip OTP is set to forcibly decrypt the boot image. However, the boot is not correctly encrypted.
4. The board DDR is faulty.
5. The boot code does not support the type of the flash memory to be burnt. If the boot print function is enabled, you can view the printing information through the serial port, showing that the current flash memory type is not supported.
Timeout error.
Failed to send the head frame.
Enter boot auxiliary code
Auxiliary code - v1.00
DDR code - V1.1.2.1 20171011
Build: Sep 11 2018 - 19:55:16
Invalid reg version
Boot auxiliary code execute failed.
STATE:0x00000000 0x00000000 0x00000000 0x00000000
Failed to download fastboot!
难道彻底成砖了?谁有救砖包呢?
看芯片为准,不要看盒子包装
下载CM201-2 YS固件备份包,用HiTool5.13烧写eMMC,失败,显示如下:
哪位大神有CM201-2 3798MV300H或者CM211-23798MV300H的线刷包?
或者哪位大神指导一下?
-
发表于 2022-1-15 17:51来自ZNDS手机版||来自江西211-2是四片的201-2是两片的
-
发表于 2022-1-15 19:12来自ZNDS手机版||来自黑龙江我的也是这个型号的,也是刷完就砖了。
-
楼主|发表于 2022-1-18 14:34||来自陕西我的也是这个型号的,也是刷完就砖了。我已经救砖成功,系统也刷好了,以及能正常使用了!
-
发表于 2022-2-7 10:37来自ZNDS手机版||来自辽宁wang1233ja 发表于 2022-1-18 14:34我已经救砖成功,系统也刷好了,以及能正常使用了!最终用的什么固件刷好的
-
发表于 2022-5-18 21:21来自ZNDS手机版||来自陕西求楼主怎么救的,QQ1035120181