-
Switch命令大全,Cisco资格认证考试要记住的
相关文章发表评论来源:本站原创时间:2010/1/22 15:58:54字体大小:A-A+
1.在基于IOS的交换机上设置主机名/系统名:
switch(config)# hostname hostname
在基于CLI的交换机上设置主机名/系统名:
switch(enable) set system name name-string
2.在基于IOS的交换机上设置登录口令:
switch(config)# enable password level 1 password
在基于CLI的交换机上设置登录口令:
switch(enable) set password
switch(enable) set enalbepass
3.在基于IOS的交换机上设置远程访问:
switch(config)# interface vlan 1
switch(config-if)# ip address ip-address netmask
switch(config-if)# ip default-gateway ip-address
在基于CLI的交换机上设置远程访问:
switch(enable) set interface sc0 ip-address netmask broadcast-address
switch(enable) set interface sc0 vlan
switch(enable) set ip route default gateway
4.在基于IOS的交换机上启用和浏览CDP信息:
switch(config-if)# cdp enable
switch(config-if)# no cdp enable
为了查看Cisco邻接设备的CDP通告信息:
switch# show cdp interface [type modle/port]
switch# show cdp neighbors [type module/port] [detail]
在基于CLI的交换机上启用和浏览CDP信息:
switch(enable) set cdp {enable|disable} module/port
为了查看Cisco邻接设备的CDP通告信息:
switch(enable) show cdp neighbors[module/port] [vlan|duplex|capabilities|detail]
相关文章
- 11-08cisco packet tracer实验-cisco路由器的备份和恢复案例
- 05-02CISCO+ASA防火墙ASDM配置
- 12-05Cisco 2800路由器IOS回复教程与工具
- 10-31CISCO路由、交换机常用配置命令、参数
- 07-14Cisco NBAR技术封杀BT和电驴下载
- 01-12Cisco 3550-EMI 交换机配置教程 配置基础命令详解
- 11-25Cisco路由器的ADSL modem配置详细介绍
- 06-04CISCO、摩托罗拉交换机密码恢复大全
- 06-03思科认证网络支持工程师(Cisco Certified Network Associate_CCN
- 05-29Cisco路由器安全技术:物理安全、口令安全、网络服务安全、协议安
相关评论
阅读本文后您有什么感想? 已有人给出评价!
-
462喜欢
-
561顶
-
24难过
-
314囧
-
121围观
-
38无聊
热门评论
最新评论
-
推荐文章
相关下载
- 1《Cisco 网络技术》课程实验指导书-交换机与路由器配置722KB下载
- 2Cisco ACS安装与应用详解1.1M下载
- 3Cisco packet tracer手机版40.7M下载
- 4Cisco Packet Tracer中文版146.8M下载
- 5Cisco TFTP Server90KB下载
- 6Cisco WebEx Meetings苹果版63.9M下载
- 7Cisco WebEx Removal Tool745KB下载
- 8Cisco 路由器的基本配置百余例238KB下载
- 9Cisco模拟器Packet Tracer软件使用图文教程353KB下载
- 10Linksys AE1000/Cisco AM10无线网卡驱动2.4M下载